Skip to content
Man MadeThings

The 5 Best Floorstanding Speakers: Klipsch, Polk, Monitor Audio, Focal and B&W

Five floorstanding speakers compared on official specs: the Klipsch RP-8000F II, Polk Reserve R700, Monitor Audio Silver 300 8G, Focal Aria Evo X N°3 and Bowers & Wilkins 702 S3, with sensitivity, amp power, prices and setup tips.

RVRahul VithalaEditor-in-ChiefPublished · 8 min read

We may earn a commission when you buy through links on this page. Learn more

Bowers & Wilkins 702 S3 floorstanding speaker with tweeter-on-top
Image: Bowers & Wilkins

Quick answer

The Monitor Audio Silver 300 8G ($3,000/pair) is the best floorstanding speaker for most people: a 3-way design with C-CAM drivers, 88 dB sensitivity and a 5-year warranty. The Klipsch RP-8000F II is the most efficient (98 dB), the Polk Reserve R700 ($1,199 each) the best value, the Focal Aria Evo X N°3 is made in France, and the Bowers & Wilkins 702 S3 ($7,900/pair) is the high-end pick.

Floorstanding speakers, or towers, do something bookshelf speakers can't: they move enough air to give you deep bass and big, room-filling sound without a subwoofer. They're also a centerpiece, so finish and build matter as much as specs.

I chose five towers from five brands, rising in price from efficient and affordable to genuinely high-end. Each makes different trade-offs between sensitivity, bass extension and size.

Every spec below comes from the maker's own product pages, spec sheets and manuals as of November 2026. Klipsch and Focal didn't show a US price to me, so I haven't quoted one; check a dealer. These are research-based picks, not listening tests, so there are no star scores. Short on space? See our best bookshelf speakers under $500.

Our picks at a glance

  1. Monitor Audio Silver 300 8G in high gloss black

    Best overall

    Monitor Audio Silver 300 8G

    List price $3,000

    Check price ↗
  2. Klipsch RP-8000F II floorstanding speaker with grille off

    Most efficient

    Klipsch RP-8000F II

    US price not listed by maker

    Check price ↗
  3. Polk Reserve R700 floorstanding speaker in black

    Best value

    Polk Reserve R700

    List price $1,199

    Check price ↗
  4. Focal Aria Evo X N°3 in black high gloss

    Made in France

    Focal Aria Evo X N°3

    US price not listed by maker

    Check price ↗
  5. Bowers & Wilkins 702 S3 in gloss black

    Best high-end

    Bowers & Wilkins 702 S3

    List price $7,900

    Check price ↗

1. Best overall

Monitor Audio Silver 300 8G

Monitor Audio Silver 300 8G in high gloss black
Image: Monitor Audio

Monitor Audio's Silver line is now in its eighth generation, and the Silver 300 8G is the best balance of size, bass and price here. Monitor Audio lists it at $3,000 a pair.

It's a true 3-way: a 25mm C-CAM Gold Dome tweeter, a dedicated 3-inch C-CAM RST III midrange and two 6-inch C-CAM RST III bass drivers, with crossovers at 610 Hz and 3.3 kHz. Monitor Audio quotes in-room response down to 30 Hz, an 8-ohm nominal impedance and 88 dB sensitivity, with a recommended 50 to 200 watts into 8 ohms.

At about 40 inches tall and 42 pounds each, it's not huge, so it suits medium rooms. Construction details include through-bolt driver bracing, a braced cabinet, Monitor Audio's Silent Flow port tuned to 41 Hz, outrigger spikes and magnetic grilles. It comes in high gloss black, European walnut and satin white, with a five-year warranty.

Pros

  1. 01True 3-way with dedicated midrange
  2. 02Bass to 30 Hz in-room
  3. 035-year warranty
  4. 04Manageable 42 lb size

Cons

  1. 0188 dB needs a decent amp
  2. 02More than double the Polk's price per pair
Design3-way
Drivers25mm C-CAM Gold Dome, 3" mid, 2× 6" bass
Frequency response30 Hz–35 kHz (in-room, −6 dB)
Sensitivity88 dB
Impedance8Ω nominal (3.9Ω min)
Amp power50–200 W (8Ω)
Warranty5 years

2. Most efficient

Klipsch RP-8000F II

Klipsch RP-8000F II floorstanding speaker with grille off
Image: Klipsch

If you have a modest amplifier, or want huge volume, the RP-8000F II is the speaker to look at. Klipsch rates its sensitivity at 98 dB, ten decibels higher than the Monitor Audio or Polk, which means it plays much louder from the same amp power.

That efficiency comes from Klipsch's signature horn: a 1-inch titanium tweeter in a 90° by 90° Tractrix horn, paired with two 8-inch Cerametallic cone woofers and a crossover at 1,630 Hz. Klipsch quotes 35 Hz to 25 kHz response and 150 watts continuous power handling. The cabinet is braced MDF with dual-chamber rear-firing Tractrix ports.

It's a big speaker, 43 inches tall and 61.4 pounds, with bi-wire and bi-amp terminals that also support Dolby Atmos height speakers. Finishes are ebony or walnut vinyl. Klipsch's US price wasn't shown to me, so check an authorized retailer. Because the ports fire to the rear, give it some space from the wall.

Pros

  1. 0198 dB sensitivity for small amps
  2. 02Horn tweeter for big, dynamic sound
  3. 03Dual 8" woofers
  4. 04Atmos speaker pass-through

Cons

  1. 01Vinyl finishes, not real wood
  2. 02Rear ports need wall clearance
  3. 03No official US price shown
Design2-way, horn-loaded tweeter
Drivers1" titanium tweeter, 2× 8" Cerametallic woofers
Frequency response35 Hz–25 kHz ±3 dB
Sensitivity98 dB (2.83V/1m)
Impedance8Ω compatible
Power handling150 W continuous
Weight61.4 lb

3. Best value

Polk Reserve R700

Polk Reserve R700 floorstanding speaker in black
Image: Polk Audio

The R700 is the biggest tower in Polk's Reserve series, and it gives you a big 3-way speaker for $1,199 each, or about $2,400 a pair. Note that Polk sells it individually.

The driver lineup is substantial: Polk's 1-inch Pinnacle Ring Radiator tweeter, a 6.5-inch Turbine Cone midrange in its own sealed enclosure, and two 8-inch polypropylene woofers, with crossovers at 2,700 and 350 Hz. Polk quotes response from 38 Hz to 38 kHz at −3 dB and 88 dB sensitivity, with a recommended 50 to 300 watts.

Polk's floor-firing Power Port 2.0 vents bass downward, which makes placement near a wall easier than with a rear port. At 79.1 pounds each, it's the heaviest speaker here. It comes in black or walnut, includes spike and pad feet, and is Hi-Res and IMAX Enhanced certified, so it works well in a home theater too.

Pros

  1. 01Big 3-way with two 8" woofers
  2. 02Floor-firing port eases placement
  3. 03Hi-Res and IMAX Enhanced certified
  4. 04Best price per pair here

Cons

  1. 01Sold individually, $2,398/pair
  2. 02Heavy at 79 lb each
Design3-way
Drivers1" Ring Radiator, 6.5" Turbine mid, 2× 8" woofers
Frequency response38 Hz–38 kHz (−3 dB)
Sensitivity88 dB
Amp power50–300 W
PortFloor-firing Power Port 2.0
Weight79.1 lb each

4. Made in France

Focal Aria Evo X N°3

Focal Aria Evo X N°3 in black high gloss
Image: Focal

Focal's Aria Evo X N°3 combines a French-made design with real efficiency. Focal's product sheet carries a "Made in France" badge and says the drivers are developed and manufactured in France.

It uses a 1-inch aluminum-magnesium "M"-shaped inverted dome tweeter, a 6.5-inch Flax midrange and three 6.5-inch Flax bass drivers, with crossovers at 260 and 3,100 Hz. Focal quotes 92 dB sensitivity, more efficient than the Monitor Audio or Polk, and a 40 to 300 watt amp range. One thing to note: Focal lists a minimum impedance of 2.8 ohms, so pair it with an amp that's comfortable with low loads.

Bass comes from a front Powerflow port plus a floor-facing port. Focal recommends rooms from 269 square feet with a listening distance of 10 to 13 feet. It's offered in black high gloss, moss green high gloss and prime walnut. Focal's US site didn't show a price, so check a dealer.

Pros

  1. 01Made in France
  2. 0292 dB sensitivity
  3. 03Flax midrange and bass drivers
  4. 04Distinctive finishes, incl. moss green

Cons

  1. 012.8Ω minimum impedance
  2. 02No US price shown
Design3-way bass reflex
Drivers1" Al/Mg M-dome tweeter, 6.5" Flax mid, 3× 6.5" Flax bass
Frequency response39 Hz–30 kHz ±3 dB
Sensitivity92 dB
Impedance8Ω nominal (2.8Ω min)
Amp power40–300 W
Room sizeFrom 269 sq ft

5. Best high-end

Bowers & Wilkins 702 S3

Bowers & Wilkins 702 S3 in gloss black
Image: Bowers & Wilkins

The 702 S3 is the largest tower in Bowers & Wilkins' 700 Series lineup on its US site, listed at $7,900 a pair.

Its tweeter sits on top of the cabinet in B&W's Solid Body Tweeter-on-Top housing, a decoupled 25mm Carbon Dome design. Below are a decoupled 6-inch Continuum cone midrange and three 6.5-inch Aerofoil Profile bass drivers. B&W quotes 90 dB sensitivity, an 8-ohm nominal impedance and a 30 to 300 watt amp range, with response from 46 Hz to 28 kHz at ±3 dB and a total frequency range of 28 Hz to 33 kHz.

Bass vents through a downward-firing Flowport into a plinth, which B&W says must always be used. At 44.8 inches tall and 73.8 pounds, it's a statement in the room. Finishes are gloss black, satin white and mocha. If $7,900 is too much, B&W's 603 S3 is $2,700 a pair and the 704 S3 is $4,500.

Pros

  1. 01Tweeter-on-top design
  2. 02Continuum cone midrange
  3. 03Three 6.5" bass drivers
  4. 0490 dB sensitivity

Cons

  1. 01$7,900 per pair
  2. 02Crossover points not published
Design3-way vented
Drivers25mm Carbon Dome tweeter-on-top, 6" Continuum mid, 3× 6.5" bass
Frequency response46 Hz–28 kHz ±3 dB
Sensitivity90 dB
Impedance8Ω nominal (3.1Ω min)
Amp power30–300 W (8Ω)
Weight73.8 lb

Sensitivity and amplifier power, explained

Sensitivity compared: Klipsch RP-8000F II 98 dB, Focal Aria Evo X N3 92 dB, B&W 702 S3 90 dB, Monitor Audio Silver 300 8G 88 dB, Polk Reserve R700 88 dB
Image: Man Made Things

Sensitivity tells you how loud a speaker plays from a given amount of power, measured at one meter. The higher the number, the less amplifier power you need.

The range here is wide:

  • Klipsch RP-8000F II: 98 dB
  • Focal Aria Evo X N°3: 92 dB
  • Bowers & Wilkins 702 S3: 90 dB
  • Monitor Audio Silver 300 8G: 88 dB
  • Polk Reserve R700: 88 dB

As a rule, every 3 dB of extra sensitivity is the same as doubling your amplifier power. So the Klipsch at 98 dB needs far less power than the 88 dB Polk or Monitor Audio to reach the same volume.

Also check minimum impedance. Focal lists 2.8 ohms and B&W 3.1 ohms, which ask more of an amplifier than an 8-ohm speaker that never dips low. Stay within each maker's recommended amp range: for example, 50 to 200 watts for the Monitor Audio and 30 to 300 watts for the B&W.

How to set up floorstanding speakers

Floorstanding speaker setup: equilateral triangle with your seat, at least 0.5 m from walls, slight toe-in, tweeters at ear height, spikes or floor protectors
Image: Man Made Things

Placement makes as big a difference as the speakers themselves. From the makers' manuals:

  • Start with a triangle. Bowers & Wilkins suggests placing speakers 1.5 to 3 meters apart, forming an equilateral triangle with your listening seat.
  • Pull them off the walls. B&W recommends at least 0.5 meters from the back and side walls. Moving speakers away from walls reduces bass; moving them closer increases it. B&W even supplies foam port plugs to cut bass.
  • Toe them in slightly. Klipsch recommends a slight toe-in for better stereo imaging and sitting about 1 to 1.5 times the distance between the speakers.
  • Tweeters at ear height, and avoid corners, says Focal.
  • Use the spikes. B&W says spikes should pierce carpet to rest on the floor beneath, and to use protectors or rubber feet on hard floors.

Break-in: B&W says to allow up to a week for temperature effects and about 15 hours of use for the drivers to settle. Focal says break-in can take a few weeks.

Which floorstanding speaker should you buy?

Which floorstanding speaker: Klipsch for low-power amps and loud volume, Polk for value and home theater, Monitor Audio for the best all-rounder, Focal for French-made efficiency, B&W 702 S3 for high-end
Image: Man Made Things

Buy the Klipsch RP-8000F II if you have a low-powered amp or tube amp, or love loud, dynamic sound. Its 98 dB sensitivity is in a class of its own here.

Buy the Polk Reserve R700 if you want the most speaker for the money, or a tower for a home theater. Its floor-firing port also makes placement easier.

Buy the Monitor Audio Silver 300 8G if you want a refined 3-way for a medium room with a long warranty. It's our top pick.

Buy the Focal Aria Evo X N°3 if you want a French-made speaker with good efficiency and striking finishes, and your amp handles low impedance.

Buy the Bowers & Wilkins 702 S3 if your budget stretches to high-end hi-fi and you want B&W's tweeter-on-top design.

Planning a full system? A good source helps: see our best hi-fi CD players and best turntables for beginners guides.

Frequently asked questions

What is the best floorstanding speaker?

+

For most people, the Monitor Audio Silver 300 8G ($3,000/pair), a 3-way tower with bass to 30 Hz in-room and a 5-year warranty.

Which floorstanding speaker needs the least amplifier power?

+

The Klipsch RP-8000F II, rated at 98 dB sensitivity, versus 88 to 92 dB for the others.

How far should floorstanding speakers be from the wall?

+

Bowers & Wilkins recommends at least 0.5 m from the back and side walls; closer increases bass, farther reduces it.

Do floorstanding speakers need a subwoofer?

+

Not always. All five here reach below 50 Hz, according to their makers; the Monitor Audio and Polk quote bass to 30 Hz and 38 Hz.

Sources

RV
Rahul Vithala

Editor-in-Chief

Rahul has been writing about gadgets and software since 2013, first at Thetechhacker and now at Man Made Things. He edits every review on the site and signs off on every verdict.

More from Rahul →

Keep reading